TYRE VALVE TOOL

TYRE GAUGE HIPREMA 0 – 2.5 BAR - EVO 4

ROTAX LOGO

THERMO DRYER GLOVES AND BOOTS

KIT 2 ENGINE FUNNELS

FEELER GAUGE PLUGS 0.05-1.00 MM - 20 blades

EXHAUST VALVE SPRING TOOL ROTAX

TOOLBOX WITH KIT FK

1 x toolbox 1 x sticker kit & fitting instructions

CARB PRESSURE TESTER

PIN GAUGES FOR CARB JETS 0.45 - 1.50 MM...

0.45 - 1.50 MM (0.05 MM)

CHAINCUTTER 215 CHAINS

OMP MECHANIC APRON

NEWLINE CYLINDER COVER FOR COLD WEATHER

PLUGHOLE CAP PLASTIC

Soft plastic cap. Prevents dust and dirt inside engine

FUEL PIPE FITTING CLIP

PLUGSPANNER STANDARD ( 21 MM)

PLUGSPANNER SMALL PLUG ( 16 MM)

TOOL ENGINE SPROCKET EXTRACTOR 100 - 125 CC

Easier removal of engine sprocket

PULLER FOR ROTOR IGNITION PVL

TOOL KIT TO REMOVE REAR AXLES

30/40/50 MM

PLUG CAP SECURITY TIE FOR ALL SMALL PLUGS...

ONLY FOR THE PLUG NGK R7282 AND OTHER SMALL PLUGS. OK FOR THE TM K10C.

OTK CASTER TOOL AND REAR BUMPER ADJUSTER

Tool for OTK castor adjusters and rear bumper adjusting

MYCHRON 5 BRACKET FOR OTK

Mychron 5 possition protected against damage

PROFESSIONAL CHARGER LIPO BATTERY

 Imax B6AC 80W Rapid to Charge, Balance, Storage and Discharge, LiPo, LiFe (Rotax litium), Pb (lead standard), NiCd and NiMH Batteries.

FRONT LASER ALIGNMENT SYSTEM R3 KELGATE -...

Laser system to adjust the direction. Toe, caster & Camber. It is part of the complete kit that can be completed with rear lasers that work together.

CASTOR KIT FRONT LASERS R3 KELGATE -...

 with the addition of Caster plates. They quickly enable  to easily set the Caster angle for any situation. They work together with the front lasers

LASER MASTERKIT COMPLETE R3 EAGLE EYE -...

Complete kit with all the laser accessories to make the adjustments and check if the chassis is bent. Contains chain laser, centering tool and steering lock

KARTCOVER BLACK